Why Twinking And Shaking Displaying On LED Screen?

Question: Why my LED screen is twinking and shaking?

Failure Cause:

a) Ground wire break down

Solution: Check the connection between whole screen and the ground wire

b) Controlling System breaks off (Sending/Receiving Card)

Solution: Check if the sending card and receiving card is working normal (green indicator twinkling, red indicator keep lighting). If the green indicator is off or keeps lighting, it means there is no signal if the indicator is off, it maybe also because its power is off). Sending card will very seldom break down. If it truly breaks off, please change the sending card.

c) Wrong voltage for Controlling system

Solution: Controlling system input voltage DC 5V

d) Loss of signal in Signal cable (internet cable)

Solution: Check the signal cable (internet cable), reconnect the cable

e) LED studio Setting has problems

Solution: Reset the LED studio software setting according to the LED software Manual

f) DVI card setting mistake

Solution: Reset the DVI setting according to the Controlling System Operate Manual

If you tried all solutions but not work, pls contact LEDFUL sales engineers and we will assist you to make "intelligent setup" with remote support.